Bad Mic R THRESH DBQ8

(Noise Reduction, Accessory Noise)

These settings allow you to adjust noise reduction parameters for specific noise conditions. The Radio Profiles - Accessory Noise Reduction Settings are recommended for most noise environments.

	These custom settings apply only when the Custom Noise Reduction (Accessory) field is selected in the referenced Radio Profile.
	Do not modify Noise Reduction settings unless you are Qualified Service Personnel. Improper settings can cause high levels of background noise to be transmitted with voice, which can cause communications to fail.

Although this field shows the value as an unsigned value, the radio firmware interprets the Hex value as a signed value. Therefore, enter the desired signed value in the Hex (right-most) box, not the Decimal box. For example, if you want to enter –1E00 (–7680), you would enter E200 (the 2's complement) in the Hex box; the Decimal box still shows 57856 but the firmware interprets E200 as a negative number in the radio.

Minimum	Maximum
E200 (Hex, signed)	0

Go to the Accessory Noise Reduction Window